mmd monitor/quartztek 30400 esperanza, rancho santa margarita, ca, 92688 phone: (949) 709-5075, fax: (949) 709-3536, www.mmdcomp.com sales@mmdcomp.com revision: 04/25/11 d revisions only with customer approval pg 1 of 2 m m t t k k h h , , m m t t k k l l , , & & m m t t k k v v s s e e r r i i e e s s t t c c x x o o ?? industry standard package ?? wide frequency range ?? hcmos, lvds, or lvpecl output ?? rohs compliant available environmental & mechanical detail marking detail line 1 = mxxxxx m = mmd xxxxx = frequency in mhz line 2 = syywwl s = internal code yyww = 4 digit date code (year / week) l = denotes rohs compli- ant line 3 = xxxxx internal use only may vary with lots black dot to denote pin 1 hcmos lvds lvpecl frequency range 10.000mhz to 200.000mhz 75.000mhz to 1.000ghz frequency stability (see part number guide for options) operating temp.range (see part number guide for options) storage temp. range -55c to +125c aging 5 ppm / yr max logic ?0? 10% of vdd max 1.43v typ vdd ? 1.620 vdc max logic ?1? 90% of vdd min 1.10v typ vdd- 1.025 vdc min supply voltage (vdd) supply current +2.5vdc 5% 65ma max 50 ma max 50 ma max +3.3vdc 5% 65ma max 60 ma max symmetry (50% of waveform) (see part number guide for options) rise / fall time (20% to 80%) 2nsec max < 100.000mhz / 1.5nsec 100.000mhz load 10k ? // 15pf 50 ohms into vdd-2.00 vdc 100 ? start time 10msec max tri-state operation voh = 70% of vdd min or no connection to enable output vol = 30% max or grounded to disable output (high impedance) control voltage (vc) option +2.5vdc 10 ppm with vc = +1.25vdc 1.00vdc, positive slope +3.3vdc 10 ppm with vc = +1.65vdc 1.50vdc, positive slope mechanical timmer option 3 ppm min 60 ma max shock mil-std-883, method 2002, condition b solderability mil-std-883, method 2003 solvent resistance mil-std-883, method 215 vibration mil-std-883, method 2007, condition a
mmd monitor/quartztek 30400 esperanza, rancho santa margarita, ca, 92688 phone: (949) 709-5075, fax: (949) 709-3536, www.mmdcomp.com sales@mmdcomp.com revision: 04/25/11 d revisions only with customer approval pg 2 of 2 part number guide mechanical details tape & reel dimensions frequency stability vs temperature table notes: unless otherwise specified 1. applicable standards / specifications ansi y14.5m , dimensions and tolerances eia-481-b , 8 mm through 200mm embossed carrier taping and 8 mm and 12 mm punched carrier taping of surface mount components for automatic handling. 2. dimensions are in millimeters [inch]. 3. tolerances are 0.1 [.004] mm unless otherwise specified. 4. do not scale drawing. notes: unless otherwise specified 1. applicable standards / specifications ansi y14.5m , dimensions and tolerances eia-481-b , 8 mm through 200mm embossed carrier taping and 8 mm and 12 mm punched carrier taping of surface mount components for automatic handling. 2. dimensions are in millimeters [inch]. 3. tolerances are 0.1 [.004] mm unless otherwise specified. 4. do not scale drawing. reel dia direction of feed q3 q1 q4 q2 q3 q1 q4 q2 pitch tape width reel dia 330 [13.0] q1 pin 1 orient. 24.00 [.945] 12.00 [.471] tape width pitch code stability 15 20 25 30 50 temp 1.5ppm 2.0ppm 2.5ppm 3.0ppm 5.0ppm a 0c to +50c g 0c to +70c c -20c to +70c d -30c to +70c e -30c to +80c f -40c to +85c = available blank = consult mmd 10 1.0ppm frequency mtk please consult with mmd sales department for any other parameters or options frequency adjust options blank = no connect b = both v/c & mech v = voltage control m = mechanical trimmer supply voltage 2 = +2.5 vdc 3 = +3.3 vdc frequency stability 15 = 1.5 ppm 20 = 2.0 ppm 25 = 2.5 ppm 30 = 3.0 ppm 50 = 5.0 ppm 10 = 1.0 ppm operating temperature a = 0c to + 50c c = -20c to +70c d = -30c to +70c e = -30c to +80c f = -40c to +85c g = 0c to +70c rohs compliant blank = not compliant f = is compliant output h =hcmos l = lvpecl v = lvds symmetry blank = 40%/60% a = 45%/55% 9.20 [.362] max 14.80 [.582] max 5.50 [.216] max 5.80 [.228] 0.3 1.40 [.055] 0.3 1.20 [.047] 1 2 3 5 6 4 pin 1 pin 2 pin 3 pin 4 pin 5 pin 6 no connection or voltage control enable / disable case ground output no connection suppy voltage (vdd) pin connections mxxx.xx syywwl xxxxx dimension in brackets are in inches external bypass capacitor is recommended unit is not hermetically sealed suggested land pattern optional trimmer 1.50 [.059] 2.50 [.098] 5.80 [.228]
|
